Dry Hop Calculator

Plan your dry-hop dose and the beer you'll have left to package. Then explore what a further gravity drop would produce, using your own scenario.

Your equipment

All dry-hop additions combined

Examples, not style rules. The Torpedo recipe is about 3.0 g/L. Exclude boil and whirlpool hops from this total.

Beer loss assumptions

Starts at 10 mL/g (10 L/kg), an illustrative assumption. Replace it with your measured loss. Hop product and separation method change it.

Total dry hops

—

Enter your batch and dose.

What if gravity falls after dry hopping?

Choose a hypothetical drop. Hop weight does not set this value. Use corrected, degassed gravity readings for the starting beer.

—

This scenario cannot tell you when beer is ready to package. Do not use hypothetical gas to reduce priming sugar or choose a pressure setting. Check fermentation after the final hop addition.

How much dry hop should I use for an IPA?

Start with a recipe or a trial you can repeat. A style name does not specify a universal dose: variety, product and the aroma you want all matter. Sierra Nevada's Torpedo IPA homebrew recipe uses 2 oz of dry hops in a 5-US-gallon batch: 1 oz Crystal, plus 0.5 oz each of Magnum and Citra. That is 3.00 g/L. Its boil additions are separate.

The Torpedo button applies that rate to your volume; it does not recreate the beer without the rest of the recipe. The other buttons are comparison trials. If you already know the total weight, select “Dose rate from hop weight” to compare it fairly with another batch. Use Recipe Scaler for the rest of a resized recipe.

Double dry hopping does not automatically double the dose

“DDH” describes a recipe or process, not a standardized mass. Here, two additions split the total you entered. At 4 g/L in 20 L, that is 80 g total or 40 g in each of two equal additions. Enter the combined weight if your recipe specifies two different doses.

How do I convert dry-hop g/L to ounces per gallon?

Multiply the rate by the beer volume before adding hops. Each cell below gives the total across every dry-hop addition, in grams and weight ounces. Gallons are US gallons. These rates are arithmetic examples, not recommended style limits or an aroma prediction.

How much beer will I lose to dry hops?

The estimate is hop grams × loss in mL/g ÷ 1,000. The starting factor, 10 mL/g, is a round planning assumption. It is not a laboratory absorption constant. It can represent beer retained with the hops and the extra beer you leave behind to separate them; record the same boundary each time you measure it.

BarthHaas reports fermentation-tank losses up to 14 L/kg with T90 pellets, with further losses possible when hop and yeast sediment cannot be separated cleanly. At 10 g/L in 20 L, that factor implies 2.8 L, or 14%, attributed to the hops. The supplier's figure illustrates a process outcome; it is not a universal cap or the right setting for every product.

Count the same loss once

Our example uses 80 g of hops and estimates 0.8 L hop loss. With 1 L of other fermenter loss and 0.5 L of transfer loss, 20 L becomes 17.7 L to package. If your equipment's total fermenter loss already includes those hops, select “Included” and keep that total instead of adding the hop estimate again.

The bottle-count calculator receives the starting volume, combined fermenter loss and transfer loss separately. It therefore reaches the same packaged volume. If your starting volume was measured after dumping yeast or drawing samples, leave those earlier losses out of this calculation.

Does more dry hopping always give more aroma?

No fixed multiplier converts hop mass into perceived aroma. Lafontaine and Shellhammer's 2018 experiment tested 0, 2, 3.86, 8, 16 g/L using a single ground whole-cone Cascade lot in mesh bags, in filtered beer, for 24 hours at 13.3–15°C (56–59°F. The authors identified 4–8 g/L as a balanced range in that setup; higher rates favored herbal/tea character and showed diminishing aroma returns.

That experiment is not a universal ceiling for pellets, concentrated products or active fermentation. It also found changes in bitter compounds. Dry hopping is therefore not necessarily “zero bitterness,” even though Tinseth and Rager do not model it. Likewise, an alpha-acid storage estimate cannot tell you how much extra hop weight restores old hops' aroma.

Why is gravity falling after dry hopping?

Hops can contribute enzymes that turn remaining dextrins into fermentable sugars. With active yeast present, renewed fermentation can lower gravity and generate more alcohol and CO₂; diacetyl can also return. The Brewers Association's hop-creep brief explains why this matters before packaging: fermentation that continues in a sealed container can create excessive pressure.

Dose alone cannot predict the gravity drop. Young and Fox's 2025 study found differences among hop varieties, origins and product formats, but no significant difference between its two tested addition rates. Those were laboratory fermentations at 10 and 20 g/L, not proof that every lower rate behaves alike. This calculator deliberately asks you to choose a hypothetical drop instead of deriving one from hop mass.

Assumed dropNew SGNew CO₂, g/LGas equivalent, volumesABV increase, points
1 point1.0131.000.510.13
2 points1.0121.991.010.26
4 points1.0103.982.030.53

Hypothetical examples only: OG 1.060, current SG 1.014. Standard ABV formula; the interactive scenario also shows the alternate formula. Gas produced is not necessarily gas retained in beer. These are neither expected hop-creep amounts nor packaging targets.

How long after dry hopping can I bottle?

A contact-time recommendation is not evidence that fermentation is finished. The Brewers Association brief notes that hop enzymes can remain after the hops are removed and that cold conditions slow, rather than eliminate, the problem. A quiet cold fermenter can behave differently after the beer warms.

In Lallemand's interview with researcher Jessica Young, she emphasizes following gravity after the addition and learning each recipe and hop lot's behavior. Degas samples and compare readings taken with a consistent method. Continuing movement means fermentation is still changing the beer. A brief stable period, a calendar date or a clear diacetyl check alone cannot establish a universal endpoint.

Record the final hop addition and subsequent readings in the fermentation log. Use temperature correction for a hydrometer, or alcohol correction for a refractometer. If the readings are unexpectedly high or stalled, the stuck-fermentation guide helps check the measurement and process. Only use the priming calculator once fermentation completion has been established; subtracting this hypothetical gas would not make an unfinished beer ready.

How are the hop-creep CO₂ and ABV estimates calculated?

The scenario reuses the same real-extract calculation as our spunding tool. Real extract accounts for alcohol's effect on density. Its decrease between the two readings, expressed in grams per liter, is multiplied by 0.46286, the CO₂ yield in Balling's balance as reported by Šavel and colleagues. Dividing by 1.9635 g/L converts that gas to an equivalent volume at standard conditions.

This assumes unchanged liquid volume and is a homebrew estimate, not a laboratory mass balance. Venting, headspace and existing carbonation are not modeled. The two ABV formulas each compare the same original gravity with the current and hypothetical final readings. Their difference is an increase in percentage points, not a relative percentage increase.