Hop Freshness Calculator

Estimate what storage has done to your hops' alpha acids — and what that changes in your recipe. Start with the lot's analysis and the storage history you know.

Your equipment

One boiled hop addition

The starting AA% is an example. Use your bag or lot analysis. Count from the date that value describes; purchase and harvest dates may differ.

Storage assumptions

Reference loss in air at 20°C / 68°F, not measured HSI. Edit it if your supplier gives a comparable value. If they give percent remaining, subtract it from 100.

Use one known storage condition. For a changed condition, carry the estimated AA% into a second calculation for the next period.

Estimated alpha acid now

—

Enter the hop analysis and storage conditions.

How much alpha acid do hops lose in storage?

The answer depends on the lot and its storage history. This calculator uses starting AA%, elapsed days, temperature, packaging and a variety's reference loss. The variety presets are historical assumptions from Mark Garetz's published table; they are not measurements of the hops in your freezer. Modern varieties without a comparable source need a custom assumption, not a borrowed variety name.

Use the analysis on your lot's label and establish what date it describes. HPA explains that its certificate of analysis describes the hops at packaging. Starting the clock at harvest can count losses that already occurred before that analysis. Starting it at purchase can miss earlier storage. If the intervening conditions are unknown, compare plausible scenarios rather than treating one number as the answer.

An estimate of alpha acids, not a freshness test

The result says what this storage model predicts. It cannot certify the bag's aroma, condition or remaining bittering compounds. A current lot analysis is stronger evidence than a date-based estimate. Changing the input assumptions is useful; adding decimal places does not supply missing history.

How do old hops change the IBUs in my recipe?

At the same weight, boil time, gravity and volume, both of our IBU formulas scale with AA%. The tool holds those recipe inputs fixed, changes only AA%, and shows the before-and-after contribution of one addition. Other hops in the recipe retain their own contributions. Use the full IBU calculator to assemble the complete schedule.

Half the alpha acid means twice the bittering weight

With the reference assumptions below, 10% hops become 5.0%. A 28 g addition in 20 L at 1.050, boiled for 60 minutes, falls from 32.3 to 16.1 Tinseth IBU. Matching the original calculation takes 56 g. It does not restore the original aroma.

If a beer made with older hops tastes less bitter than expected, storage is one possible explanation. Check the starting AA%, actual wort volume and addition times too. The hop substitution calculator handles the weight adjustment; the recipe scaler handles a batch-size change. Keep those adjustments separate so the same loss is not counted twice.

Do hops last longer in the freezer or refrigerator?

Here is what the model predicts for the same example under different conditions. Read across a row as a scenario, not a guaranteed shelf life. A sealed barrier bag must actually exclude oxygen; an ordinary bag with the top folded over does not receive the sealed-storage assumption.

StorageTemperatureAA% leftTinseth IBU
Freezer, barrier bag-18°C / -0°F9.4%30.4
Refrigerator, barrier bag4°C / 39°F8.5%27.4
Room, barrier bag20°C / 68°F7.1%22.8
Room, air exposed20°C / 68°F5.0%16.1

Computed from the shared storage and IBU engines: 180 days, starting AA 10%, reference six-month loss 50% in air at 20°C, 28 g in 20 L, SG 1.050, 60-minute boil. These are model scenarios, not measured lots.

Real sealed pellets can outperform that curve. In Mikyška and Krofta's storage experiment, four varieties vacuum stored at 2°C lost only 0.3–5.5% of alpha acids over 12 months; vacuum storage at 20°C lost 20.6–24.9%. The experiment used specific varieties and conditions. Its results demonstrate why this historical model cannot promise a universal loss rate for modern packaging.

Can I use old hops, or should I replace them?

Age alone is not a discard date. Decide what you need the hops to do. For a boiled bittering addition, estimated AA% can help you explore the recipe consequence. For a late addition or dry hop, multiplying the weight by the alpha-acid ratio does not establish the right aroma dose. The dry-hop calculator helps compare recipe doses and their beer-loss assumptions.

BarthHaas describes how oxidation changes hop oils and forms other bitter compounds. Those changes are outside this calculator. A large calculated weight increase can therefore change the beer in ways its IBU number cannot explain. This tool stops recommending a compensating weight once it estimates that more than half the starting alpha acid is gone; that is an editorial guard rail, not a chemical expiry threshold.

For storage at home, the American Homebrewers Association recommends limiting oxygen, heat and light. Portion what you need, reseal the remainder in suitable barrier packaging and return it to cold storage. Label the lot and when it was opened. A new bag from a known source can be a more useful choice than trying to reconstruct an unknown bag's history.

Is Hop Storage Index the same as six-month alpha-acid loss?

No. The input here is a percentage lost under reference conditions. Laboratory Hop Storage Index is an optical measurement associated with oxidation. BarthHaas also shows why HSI interpretation depends on variety. Do not type a lab HSI reading into the loss field, or read a retention percentage as a loss percentage.

If your supplier publishes percent remaining after the same reference test, loss is 100 minus that value. If the test temperature, duration or packaging differs, its figure is not interchangeable with this input. Ask for a comparable storage specification or use the tool to compare explicitly hypothetical assumptions.

What formula does this hop storage calculator use?

The Garetz model is exponential decay. From a reference loss fraction L, the daily constant is k = −ln(1 − L) / 180. Temperature multiplies the rate by 2^((T − 20) / 15), with T in Celsius. Packaging multiplies it again. Remaining alpha acid is starting AA × exp(−k × temperature factor × packaging factor × days).

Garetz's worked example starts at 6.4% AA and gives 6.3% after 37 days at 10°F in protected packaging. This engine reproduces that rounded result. It uses the stated temperature-halving rule directly; rounded lookup tables can differ slightly.

Warm storage above the reference temperature and periods beyond a year receive an extrapolation warning. The input limits are calculation boundaries, not proof that the model is accurate inside them. For several storage periods, apply each period to the preceding result. Unknown conditions stay unknown.